SearchAllSoft.com - MeshWorks for Rhino 1.0

MeshWorks for Rhino is a plug-in for Rhino. It adds a mixture of meshwork manipulation commands to Rhino. Some of the useful commands are given below: Hollow: This command hollows the meshwork to a given wall thickness. Hollowing is particularly useful while preparing a framework for Rapid Prototyping as it saves material, time and money while building a prototype. Offset: This command offsets a meshwork to either shrink or inflate it. PointsToMesh: This command creates a meshwork from a specify of points. Stitch: This command knits loosely tied faces of a meshwork and attempts to do a meshwork water-tight. FillHoles: This command adds faces to an existing meshwork in say to replete any holes. The result is a water-tight meshwork. ExtractSolid: This command extracts a noble from a meshwork. ExtractPlanarSurfaces: This command extracts a planar trimmed NURBS surface from a meshwork. ExtractShells: This command extracts connected surfaces from a single meshwork and creates a novel meshwork for each connected surface. This is useful while working on different parts of a meshwork. ExtractSurfaces: This command extracts surfaces of a meshwork and creates a novel meshwork for each surface. ExtractFeatures: This command extracts features of a meshwork. This is useful to create a NURBS framework from a polygon meshwork. ExtractBoundaries: This command extracts the boundaries of an outdoors meshwork. SplitMesh: This command splits a meshwork with a planar surface into two parts. Smoothen: This command relaxes a meshwork by removing sharp edges. Decimate: This command reduces the routine of faces of a meshwork while maintaining continuity in the topology. MeshWorks for Rhino adds a novel menu to the existing Rhino menu containing all the added commands. Simply use this menu to falsify meshes.